Control; Table 4-4 Control Setting Descriptions - High End Systems x.Spot Xtreme Handbuch

Control

The Control parameter is controlled with DMX Channel 14.
To access all control settings (except for Pan & Tilt MSpeed Off), first select a control
channel value, then set the Shutter channel to "0."
In the x.SpotXtreme fixture, the Control parameter functions have been expanded to
allow remote homing of individual functions as well as the entire fixture with a DMX
controller.

Table 4-4 Control Setting Descriptions

Control Setting
Safe
Pan & Tilt MSpeed Off
Display Off
Display Dim
Display Bright
Home All
Lamp On
Lamp Off
Shutdown
Home Pan/Tilt
Home Color System
Home Gobo System
Home Strobe/Dim
Home Focus/Zoom/Frost
Home Iris
4-10 DMX Programming
Disables all Control settings for normal operation.
Sets Pan & Tilt MSpeed off.
Sets display to off.
Dims display characters.
Brightens the display characters.
Remotely homes the fixture.
Remotely restrikes the fixture's lamp.
Remotely extinguishes the fixture's lamp.
Remotely shuts down the fixture. When a fixture is shut down,
the lamp is extinguished, power to the motors is disabled, and
the display reads [SHUTDOWN]. If a fixture is in shutdown mode,
the fixture must be homed to bring it back into operation.
Remotely homes individual function groups without homing all
the fixture's features.
Description
x.Spot Xtreme User Manual
®