Inhaltsverzeichnis
Werbung
Chapter 2:
Setup and Configuration
Unpacking the Fixture
Unpack the x.SpotXtreme
both the outside of the fixture for physical damage and the optical assembly for
damage to glass components. To access the optical assembly, loosen the three (3)
captive screws on each side of the fixture head. Remove the bezel by lifting away
from the base and toward the lens, see Figure 2-1.
If there is damage, notify both the shipping agent and the sales agent immediately.
When replacing the bezel, ensure that it is fitted securely in the yoke channel on both
sides of the fixture as shown in Figure 2-1.
Figure 2-1 Removing and replacing the bezel
Captive Screws
Save All Shipping Materials
Do not discard the shipping carton and packing materials. The carton and packing
materials are specifically designed to protect the product during transport.
High End Systems® assumes no responsibility for products that are damaged during
transport. Return a product for repair in its original shipping carton and packing
materials.
x.Spot
Xtreme User Manual
®
Xtreme fixture and verify that it is undamaged. Inspect
®
Bezel channel in
yoke arm
Setup and Configuration
2
2-1
Werbung
Inhaltsverzeichnis
