Inhaltsverzeichnis
Werbung
Setting the DMX Start Channel
Each standard configuration x.SpotXtreme fixture requires a block of 38
consecutive channels on a 512-Channel DMX link.
Customized x.SpotXtreme fixtures may have modules with a different
number of channels required. Use that range in calculating the Start
channels on the link for those fixtures.
Up to thirteen 38-channel standard x.SpotXtreme fixtures can be
assigned to a single 512-Channel DMX link.
For more information on Start Channels, see "Determining DMX Start
Channel Assignment" on page 3-6.
To Set the Start Channel on an x.SpotXtreme Fixture:
1. Access the fixture's menu system via the dot matrix display on the fixture's front
panel. For a detailed description of the menu system, see Chapter 3.
Figure 2-7 The x.SpotXtreme menu system navigation buttons
Use left and right arrows to
move through the current
menu level options
Use the Menu button (on the left
when viewing the display) to
unlock the menu and move back
to the previous menu level
Note: Navigation system buttons' functions invert automatically when the fixture is
turned upside down.
2. Unlock the menu system by pressing and holding down the Menu button until the
extended 2-line display appears. DMX ADDRESS MENU is the first option at the top
menu level.
3. Press the Enter button to select. The display will show SET DMX START
CHANNEL:###. The display will show the start channel currently assigned to the
fixture.
4. Use the up and down arrow buttons on the Navigation button to select a new
DMX start channel. The display will flash a new option ready for selection.
x.Spot
Xtreme User Manual
®
Use up and down arrows to
select from available value or
setting options.
4-way Navigation Button
Use the Enter button (on the
right when viewing the
display) to store a selected
menu value or option.
Setup and Configuration 2-11
2
Werbung
Inhaltsverzeichnis
