US Robotics courier Benutzerhandbuch Seite 80

Kapitel 6 - Hilfeseiten
S-Register Funktionen (S$)
Mit ATS$ sehen Sie die vier Hilfeseiten mit den S-Registern
ats$
HELP, S Register Functions (CTRL-S to Stop, CTRL-C to Cancel)
S0 Ring to Answer On
S1 Counts # of Rings
S2 Escape Code Char
S3 Carriage Return Char
S4 Line Feed Char
S5 Backspace Char
S6 Wait Time/Dial Tone (sec)
S7 Wait Time/Carrier (sec)
S8 Comma Time (sec)
S9 Carrier Detect Time (1/10sec)
S10 Carrier Loss Time (1/10sec)
S11 Dial Tone Spacing (msec)
S12 Escape Code Time (1/50sec)
S13 Bit Mapped
1 = Reset On DTR Loss
2 = Do Originate in Auto Answer
4 = No Pause Before Result Codes
8 = Do DS0 On DTR
16 = Do DS0 On Reset
32 = Disable HST
64 = Disable MNP Level 3
128 = Hardware Reset
S14 Bit Mapped
1 = Escape Code Hang Up
S15 Bit Mapped
1 = Disable High-Freq EQ
2 = Disable Online Fallback
4 = Disable 450 bps Back Channel S38 Disconnect Wait Time (sec)
8 = Reduced Non-ARQ TX Buffer
16 = Disable MNP Level 4
32 = Set DEL=Backspace
64 = Unusual MNP-Incompatibility
128 = Custom Applications
S16 Test Modes
1 = Analog Loopback
2 = Dial Test
4 = Test Pattern
8 = Remote Digital Loopback
16 = Reserved
32 = Reserved
64 = Reserved
128 = Reserved
S17 Reserved
S18 &Tn Test Timeout (sec)
S19 Inactivity Timeout (min)
S20 Reserved
S21 Break Length (1/100sec)
S22 Xon Char
S23 Xoff Char
S24 DSR Pulse Time (1/50sec)
S25 DTR Recognition Time (1/100sec)
S26 RTS/CTS Delay Time (1/100sec)
S27 Bit Mapped
1 = Reserved
2 = Disable TCM
6-12
S29 Reserved
S30 Reserved
S31 Reserved
S32 Talk/Data Switch
0 = Disabled
1 = Originate Mode
2 = Answer Mode
3 = Redial Last Number
4 = Dial Stored Number 0
5 = Auto Answer Toggle
6 = Reset Modem
7 = Initiate RDL
8 = Busy Toggle
9 = Execute Stored Cmd
S33 Reserved
S34 Bit Mapped
1 = Disable V32bis
2 = Disable Enhanced V32 mode
4 = Disable Quick V32 retrain
8 = Enable V23 Fallback
16 = Change MR to DSR
32 = Enable MI/MIC
64 = Disable RA Busy Msg
128 = Disable Terbo
S35 Reserved
S36 Reserved
S37 Reserved
S39 Reserved
S40 Reserved
S41 # of Allowed Login Attempts
S42 Remote Escape Code Char
S43 Remote Escape Code Time (1/50sec)
S44 Leased Line Delay Timer (sec)
S51 Bit Mapped
1 = MNP/V.42 Disabled in V.22
2 = MNP/V.42 Disabled in V.22bis
4 = MNP/V.42 Disabled in V.32
S53 Bit Mapped
1 = Enable Dial Security
2 = Enable Autopass Fallback
4 = Enable Local Access Psw
8 = Reserved
16 = Reserved
32 = Reserved
64 = Reserved
128 = Reserved