A 3 Drawings And References For Attachment - MICRO-EPSILON wireSENSOR WDS series Betriebsanleitung

Appendix | Drawings and References for Attachment
A 3
Mounting Instructions for Magnetic Holder MH1 - WDS
The force normal to the St 37 plate is approximately 18 kg (635 oz) at 20 °C (+68 °F).
The lateral force sustainable is, dependent on the surface, about 20 - 35 % of normal adhesion.
Operation temperature: -40 to +120 °C (-40 °F to +248 °F)
Temperature coefficient of the adhesion (reversible): -4 % per 10 °C at 20 °C
Strong vibration may cause a displacement of the magnetic holder when subject to a strong lateral force.
Weight appr. 100 g
Fig. 23 Magnetic holder MH1 - WDS, dimensions in mm (inches), not to scale
i
wireSENSOR, WDS P60/P96/P115
Drawings and References for Attachment
13 ±1 (0.51 ±0.04)
6±0.5 (0.24 ±0.02)
ø50 (1.97 dia.)
When mounting, make sure there is adequate adhesion!
Uneven surfaces, layers of lacquer and rust reduce adhesion.
Page 97