Safety
1.4
Draw wire sensors are used for
- distance or displacement measuring
- position determination
of components or moving machine parts.
- The sensors must only be operated within the limits specified in the technical data, see Chap.
- Draw wire sensors must be used in such a way that no persons are endangered or machines and other
- Take additional precautions for safety and damage prevention in case of safety-related applications.
1.5
- Protection class for sensor:
- Operating temperature:
- Storage temperature:
- Humidity:
- Ambient pressure:
- Vibration:
- Mechanical shock:
i
1.6
Do not further extract the measuring wire but only to the specified measuring range. This may lead to dam-
age of the measuring wire and also to uncontrollable snapping of the measuring wire. Danger of injury.
Make sure the sensor is not held by another person when the measuring wire is extracted. Danger of snap-
ping and injury.
1)
wireSENSOR, WDS P60/P96/P115
Intended Use
material goods are damaged in the event of malfunction or total failure of the sensor.
Proper Environment
Note the slight power dissipation of the potentiometer above +40 °C (+104 °F)! (-0.15 W/10 K)
Foreseeable Misuse
Models with male plug connection only with gasketed female plug
IP 65
1)
-20 to +80 °C (-4 to +176 °F)
-40 to +80 °C (-40 to +176 °F)
5 - 95 % (non-condensing)
Atmospheric pressure
According to IEC 68-2-6
According to IEC 68-2-27
2.
Page 60