Safety
1.
System operation assumes knowledge of the operating instructions.
1.1
The following symbols are used in these operating instructions:
i
1.2
The supply voltage must not exceed the specified limits.
> Risk of injury
> Damage to or destruction of the sensor
Do not open the sensor housing.
> Danger of injury from pre-tensioned spring motor
Do not pull or loop the measuring wire around unprotected parts of the body.
> Danger of injury
Do not let the measuring wire rewind without control (snap back).
> Danger of injury from whiplash effect of the wire with assembly bolts/clips
> Destruction of wire
> Destruction of sensor
wireSENSOR, WDS P60/P96/P115
Safety
Symbols Used
Indicates a hazardous situation which, if not avoided, may result in minor or mode-
rate injury.
Indicates a situation that may result in property damage if not avoided.
Indicates a user action.
Indicates a tip for users.
Warnings
Page 57