Installation And Mounting; Precautionary Measures; Sensor Assembly - MICRO-EPSILON wireSENSOR WDS series Betriebsanleitung

Installation and Mounting

4.
4.1
Uncontrolled retrac-
Do not pull the measuring wire over range
tion of the measuring
> Damage to or destruction of the sensor is possible
wire is incorrect!
> Danger of injury
Do not damage the measuring wire.
from whiplash ef-
Do not oil or grease the measuring wire.
fect of the wire
with assembly
Do not bend the measuring wire
bolts/clips
Do not pull the measuring wire at an angle
> Destruction of
Do not allow to loop the measuring wire around objects.
wire and/or of
Do fix the measuring wire to the target when wound up.
sensor.
Do not loop the measuring wire round parts of the body.
Save the wire during
4.2
installation work.
- Mount the sensor through mounting grooves for nut M4 DIN 934 or bolt M4 DIN 931, see
- Mount the sensor through mounting clamps MT60-WDS, see
The sensor does not have to be oriented in a special way.
This prevents that liquids penetrate the measuring wire outlet.
i
wireSENSOR, WDS P60/P96/P115
Installation and Mounting

Precautionary Measures

Sensor Assembly

Fig. 16.
Choose the installation position so that damage and soiling of the measuring wire is avoided.
Prefer an installation position with measuring wire outlet facing downwards.
Do not let snap the measuring wire!
No warranty by damage through snapping.
Fig. 28.
Fig. 2 up to, see
Page 70