Technical Data Model P60 Analog - MICRO-EPSILON wireSENSOR WDS series Betriebsanleitung

Functional Principle, Technical Data
2.3

Technical Data Model P60 Analog

Model
Output type
Measuring range
±0.1 % FSO ±
Linearity
±0.25 % FSO ±
±0.5 % FSO ±
Resolution
Sensor element
Temperature range
Housing
Material
Wire acceleration
Wire retraction force (min)
Wire retraction force (max)
Sensor mounting
Wire mounting
Weight
Wire misalignment
Protection
EN 60529: 1991
class
Vibration IEC 68-2-6
Shock IEC 68-2-27
Electrical Output P/E
connection Output U/I
FSO = Full Scale Output
wireSENSOR, WDS P60/P96/P115
WDS- 100-P60
P/U/I
mm (inch) 100 (3.94) 150 (5.91) 300 (11.8) 500 (19.7) 750 (29.5) 1000 (39.4) 1500 (59.1)
mm (inch)
mm (inch)
mm (inch) 0.5 (0.02) 0.75 (0.03)
% FSO
Conductive plastic
potentiometer
Wire
g
N 6.5
7.5
N
g
150-P60 300-P60 500-P60
P/U/I P/U/I P/U/I
0.5 (0.02) 0.75 (0.03)
0.75 (0.03)
quasi infinite
-20 ... +80 °C (-4 ... +178 °F)
Aluminum
Stainless steel with polyamid sheath
approximately 10 ... 15 g (depends on measuring range)
4.5 6
5.5 7.5
Mounting grooves in the housing
Wire clip
approximately 370 (WDS - ... - P60 - CR -P)
approximately 455 (WDS - ... - P60 - SR -U/I)
max. 3 degrees
IP 65 (Only if plug is connected to socket)
20 g, 20 Hz, ... 2 kHz
50 g, 10 ms
integral cable, radial, 1 m long
flange connector, radial, 8-pin, DIN45326
750-P60 1000-P60
P/U/I P/U/I
1 (0.04)
Hybrid-potentiometer
6 4 5
7.5 5.5 7.5
1500-P60
P/U/I
1.5 (0.06)
3.5
5.5
appr.
500
Page 62