Voting; Override Mode; Push-To-Talk Mode; Automatic Mode - Beyerdynamic MCW-D 200 Bedienungsanleitung

MCW-D 200 – Microphone Units
Programmable Functions of the Microphone Units with the MCW-D 200 Editor Software
6.4

Voting

(11)
(12)
6.5

Override Mode

If the microphone units operate in the Override mode, the microphone unit that was switched on first, will be switched off, when another
microphone unit is switched on and the number of open microphones (NOM) will be exceeded.
Important:
• This is only for microphone units that operate in the override mode; others are not affected.
6.6

Push-To-Talk Mode

Delegate
(8)
6.7

Automatic Mode

If the microphone units operate in the Automatic mode, the microphone units are switched on via voice control. That is the microphone unit
is switched on as soon as someone speaks into the microphone. In this case it is not necessary to press the microphone button.
Important:
• The threshold and the auto-off time can be configured with the MCW-D 200 Editor software for each microphone unit individually.
For discussions with subsequent voting you need the MCW-D 2071 and 2073
microphone units with display or the MCW-D 2673 with the CA 2473-2
operating unit. For voting these units have 3 buttons (12) below the display
(11).
Please refer to the corresponding manual MCW-D 200 Voting Software for
more information.
Chairman If the microphone units operate in the Push-To-Talk mode (PTT) the microphone
button (8) must be pressed as long as someone speaks into the microphone.
(8)
65