5 Scope of Delivery and Accessories
5.1 Components for the Patient
•
Orthotic system, fully assembled with C-Brace 17B300=L Joint Module (left) or C-Brace 17B300=R Joint Mod
ule (right)
•
1 pc. 4E50* Battery Charger
•
1 pc. Power Supply 757L16*
5.1.1 Recommended Accessories
•
4X74 Car Charging Cable
5.2 Accessories for the Prosthetist / Orthotist
•
Adjustment software C-Soft 4X180=V2.6 or higher incl. 647G268 Instructions for Use.
Update from 4X180=V2.0, 4X180=V2.2, 4X180=V2.4 to 4X180=V2.6 via internet download.
•
60X7 BionicLink incl 647G782 Instruction for Use
•
60X5 BionicLink PC incl. 647G506 Instructions for Use
•
INFORMATION
C-Soft 2.6 only works correctly with the 60X5 BionicLink PC Bluetooth adapter. All other Bluetooth adapters,
including those integrated into the computer, are not supported.
6 Charging the Battery
INFORMATION
Advise the patient of the information in this chapter.
INFORMATION
In order to avoid damage during the charging process, the orthosis does not function while charging. Current
stance phase resistance is selected.
INFORMATION
• Charging the battery is only possible at temperatures over 0°C / 32°F.
• Fully charging the battery in the orthosis takes approximately 6 - 8 hours.
• Prior to initial use, the installed battery should be charged for at least 3 hours.
INFORMATION
• The capacity of a fully charged battery is sufficient for one full day.
• We recommend charging the battery overnight when using the orthosis on a daily basis.
6.1 Connecting the Power Supply and Battery Charger
C-Brace
Scope of Delivery and Accessories
Ottobock | 55