Scope Of Delivery And Accessories - Ottobock 757B35-1 Gebrauchsanweisung

► Avoid remaining in the vicinity of visible or concealed theft prevention systems at the
entrance/exit of stores, metal detectors/body scanners for persons (e.g. in airports) or other
sources of strong magnetic and electrical interference (e.g. high-voltage lines, transmitters,
transformer stations, computer tomographs, magnetic resonance tomographs, etc.).
► When walking through theft prevention systems, body scanners or metal detectors, watch
for unexpected behaviour of the product.
CAUTION
Independent manipulation of the product
Injury due to malfunction and resulting unexpected prosthesis actions.
Manipulations to the product other than the tasks described in these instructions for use are
►
not permitted.
► The product and any damaged components may only be opened and repaired by authorised,
qualified Ottobock personnel.
CAUTION
Charging the product with soiled charging receptacle contacts
Injury due to unexpected behaviour of the product caused by insufficient charging.
► Make sure that the contacts are always clean and free of grease.
► Clean the electrical contacts of the charging plug and charging receptacle regularly using
cotton swabs and a mild soap solution.
► Take care to avoid damaging the contact surface coating with pointed or sharp objects.
CAUTION
Distance to HF communication devices is too small (e.g. mobile phones, Bluetooth
devices, WiFi devices)
Injury due to unexpected behaviour of the product caused by interference with internal data
communication.
► Therefore, keeping the following minimum distances to these HF communication devices is
recommended:
• Mobile phone GSM 850/GSM 900: 0.99 m
• Mobile phone GSM 1800/GSM 1900/UMTS: 0.7 m
• DECT cordless phones incl. base station: 0.35 m
• WiFi (routers, access points,...): 0.22 m
• Bluetooth devices (third-party products not approved by Ottobock): 0.22 m

5 Scope of Delivery and Accessories

Scope of Delivery
• 1 pc. 757B35=1/757B35=3 MyoEnergy Integral
• 1 pc. 647G533 instructions for use (qualified personnel)
Additional scope of delivery for socket fabrication
• 2 pc. lamination dummy
• 1 pc. lamination dummy – charging receptacle
• 1 pc. drilling template for charging receptacle
• 2 pc. battery installation aid
• 2 pc. Hook and loop closure strap (only included in the scope of delivery for the 757B35=3
MyoEnergy Integral)
• 4 pc. countersunk head screws
16 | Ottobock
Downloaded from www.Manualslib.com manuals search engine