Ottobock C-Brace Gebrauchsanweisung Seite 72

Handling, Functionality, Risks
Activating 2nd mode:
INFORMATION
Regardless of the mode selected before switching, this process always switches to 2nd mode.
1) Push and hold button 2.
→ A long beep signal is emitted.
2) Take the weight off the orthosis.
→ Two short beep signals are emitted.
→ The orthosis has successfully switched to 2nd mode.
Activating LOM mode:
From 1st mode to LOM mode:
► Briefly push button 2 twice.
→ Three short beep signals are emitted.
→ The orthosis has successfully switched to LOM mode.
From 2nd mode to LOM mode:
1) Briefly push button 2 twice.
→ A long beep signal is emitted.
2) Take the weight off the orthosis.
→ Three short beep signals are emitted.
→ The orthosis has successfully switched to LOM mode.
INFORMATION
LOM mode is automatically deactivated by switching to 1st mode or 2nd mode.
Overview – Mode Switching
Table – Mode Switching
From To Push button 1
(top button)
1st 2nd
1st LOM
2nd 1st
72 | Ottobock
Push button 2
(bottom button)
Long
2x short
Long
Overview – Movement Patterns
Beep signal Additional action
Long Weight off orthosis
3x short
Long Weight off orthosis
Beep signal
2x short
Short
C-Brace