Scope Of Delivery And Accessories; Preparation For Use; Required Tools - Ottobock 3F1-1 Gebrauchsanweisung

5 Scope of Delivery and Accessories

5.1 Scope of delivery
• 1 pc. Functional shank
• 1 pc. Functional knee part
• 1 pc. Sheath
• 1 pc. Installation ring for 4X259 inductive charger (only for 3F1=2)
• 1 pc. Screwdriver with wing handle
• 4 pc. Cable ties
• 4 pc. Blind plug (plastic set screw)
• 1 pc. 647G1290 instructions for use (user)
• 1 pc. 647G1289 instructions for use (qualified personnel)
• 1 pc. 647G1294 additional documentation
5.2 Accessories
The following components are not included in the scope of delivery and must be ordered separ­
ately:
• 1 pc. 99B120=* functional stocking
Accessories for the 3F1=1 functional cosmesis C-Leg
• 1 pc. 4X157 charger extension cable – knee

6 Preparation for use

6.1 Required tools

• Adhesive tape
• 636N9 contact adhesive
• Measurement equipment: folding rule
• 710D20 torque wrench
• Allen key size 2
• Allen key size 4
• 4H105 knee extender (only for C-Leg)
Read the 647G1375 instructions for use.
• Double-sided adhesive tape
• Protective goggles
6.2 Check for collision and adapt functional knee part
CAUTION
Incorrect protective equipment
Injury due to defective or lack of protective equipment.
► Wear protective goggles and a dust mask during grinding.
Complete the following steps to put on the functional knee part:
34
• Scissors
• Scriber
• 4X258 installation tool for inductive charger
• Dust mask
• Pedilen or Plastazote (thickness 5 mm)