Command Description - GOK SmartBox 4 Montage- Und Bedienungsanleitung

Comm- Parameter
and
#A
#TA
#Q
#Q+
#S=
#S=0
#S=1
#S=3
#S=2
#S=21
Receive SMS messages as E-mail
Optionally, the messages automatically sent by the SmartBox
also be received as E-mails.
To this end, a service telephone number and a recipient's e-mail address must be specified in
accordance with the respective network operator.
As an alternative, the www.smart-inspector.com system also provides this
function without any extra fee.
Command Description
#T=8000 Service telephone number for the T-Mobile network (in Germany)
#T=3400 Service telephone number for the Vodafone network (in Germany)
#T=6245 Service telephone number for the O
#H=MyEmail@address.com
[Leerzeichen][+Header-Text]  insgesamt
max. 40 Zeichen
Example: #T=8000#H=info@gok-online.de HEL-Tank1, Hauptstr.7, 97340 MB
26 / 32
Description
Query alarm texts and alarm bits
Query the stored #A1 parameters
Format: Header; Alarm-Para; A1:0,Text
Alarm1; Alarm-Bits;(+); (PS) 05.02.604
(Modem-ID)
Query alarm numbers and alarm delay
The alarm numbers in the alarm chain set with
#TA= are read.
The parameterised delay (#Q=) between two
alarms is confirmed.
Format: Header; Alarm-Tel;
004917619808000; 0049123456789; 20min
Acknowledge alarms. Sending alarms to the
subsequent alarm numbers is also stopped.
Acknowledge alarms and subsequent OK
messages when alarms are cancelled.
Determines the relay switching functions
Switch relay to OFF
Switch relay to ON
Relay deactivated - the relay is functionless
Relay active -switch status depends on the
measured value
Relay active+SMS - like #S=2 but with SMS
SmartBox
®
, e.g. limit value or alarm, can
network (in Germany)
2
Mention e-mail address first in the header
® ®
4 / SmartBox
Standard /
default value
 only
SmartBox
part no. 28 400 57 c
4 PRO
4
®