General Product Information; Intended Use - GOK SmartBox 4 Montage- Und Bedienungsanleitung

Do not use this device for safety applications or emergency stop mechanisms
or misuse it!
Injuries and damage to health and property through misuse.
You must observe the information contained in these instructions, especially
regarding installation, start-up and maintenance.
Damaged or destroyed insulation!
Can result in short circuit or electric shock.
Do not use the device if the insulation is damaged!
Have new insulation installed by a specialised company!

GENERAL PRODUCT INFORMATION

The electronic tank management system SmartBox
for remote monitoring of the liquids contained in unpressurized liquids tanks.
In addition to the registration of tank content and remote data transfer, other functions can be
implemented by system enhancements, e. g. temperature measurement, message about
system fault or connection to master control systems of the building. A SIM card is required
for remote data transmission.
Typically, a message will be received by the accounting management system www.smart-
inspector.com. Optionally, the messages can be received on any mobile phone.
®
The SmartBox 4 has relay control functions, e. g. for activating external alarm devices,
solenoid valves, or the dry-run protection function of pumps.
Via an integrated interface, a maximum of three more content indicators SmartBox
can be connected whose measurements are also telecommunicated.
®
SmartBox 4 PRO allows the content of up to four tanks to be recorded and monitored
remotely.
Because of its modular design, the system can be modified to suit many different applications.
The indicated measurements are not calibrated for invoicing.
®
SmartBox 4 has a 2-line LCD display, a measuring input for connecting the probe, a
programmable relay with make and break switching output, a fault message input and an
integrated GSM modem for remote data transmission.
®
SmartBox 4 PRO has a 2-line LCD display, four measuring inputs to connect the probes, a
fault message input and an integrated GSM modem for remote data transmission.
By default, the measuring probe can be installed with tank connecting threads G1, G1 1/2 or
G2.

INTENDED USE

Operating media
Operating media with consideration of the otherwise suitable probe type and
accessories, see:
Please comply with the "Level gauge type FSA-W 4-20 mA for SmartBox
1 – 4" assembly and operating manual!
part no. 28 400 57 c
®
SmartBox 4 / SmartBox
® ®
4 and SmartBox
®
4 PRO
4 PRO can be used
®
1, 2 or 3
®
3 / 32