GOK SmartBox 4 Montage- Und Bedienungsanleitung Seite 56

Comm- Parameter
and
#H=
Text 0 – 40
characters
max.
#P=
10,30,15,07
(always enter 4
values as 2-
digit figures,
preceded by 0 if
necessary!)
5. Value:
10,30,15,07,
0,5,0
6. Value:
10,03,15,07,
0,5,0
7. Value:
10,03,15,07,
0,5,0
#Pn=
#P Change
parameters
individually
#A1=
Configure alarm
1: 0, "Text"
24 / 32
Description
Header-Text, introducing every SMS message. Tank
Fill level message points:
Number 1 = Percentage increment for new
message, e.g. report fill level
after every 10%.
Number 2 = Period of days for new message,
e.g. send a report on the system
min. every 30 days. Or indicate
number of hours with xxh. Add
'h' to indicate a number of hours.
Number 3 = 'Critical limit value' in per cent,
i.e. if the value falls below the
limit, an alarm message is sent.
Number 4 = Interval of days for repeating the
message on limit value.
Number 5 = 0 Triggers a limit value report as
soon as one of the tanks
reaches the reserve level.
1 Triggers a limit value report
only when all of the tanks reach
the reserve level.
Number 6 = Percentage for increase in
content, that triggers a fuelling
report, e.g. 5%
Number 7 = 1 or 0. With 1, in a fuelling case
a message with the initial value
is displayed.
The above #P parameters can also be set
individually: e.g. #P6=8 or #P2=36h
Configuration: 0 (alarm, when contact closed)
1 (alarm, when contact open)
Additional text: e.g.: Boiler cold
(max. 15 characters)
®
SmartBox 4 / SmartBox
®
4 PRO
Standard /
default value
monitoring
[from..to]
10,
[01..99] %
30,
[01..99] Tg
[01h..24h]
15,
[00..99] %
07,
[01..31] days
[01h..24h]
0
[0 or 1]
5
[01..99] %
0
[0 oder 1]
0, system fault
part no. 28 400 57 c