Function Description - GOK ODR Montage- Und Bedienungsanleitung

7. FUNCTION DESCRIPTION

Model
Properties
Type ODR
Oil pressure regulator, with fixed adjustment
(description according to prEN 12514-1 non-adjustable pressure regulator)
Type ODR
see Type ODR but also suitable for biogenic operating media
Bio
Type ODRE-
Oil pressure regulator, adjustable:
M (description according to EN 12514-1 adjustable pressure regulator),
• with display of outlet pressure on a pressure gauge 0 to 4bar, adjustable
• the outlet pressure of the pressure regulator can be adjusted so that
• the inlet pressure is 1.5bar higher than the outlet pressure
• when the flow rate is 0l/h, the set outlet pressure increases by
• the outlet pressure is dependent on the flow rate; if the flow rate is
8. CONNECTIONS - FOR OIL FIRING INSTALLATIONS
Inlet and outlet
Type ODR, Type ODR Bio
Type ODRE-M
Alternative inlet
Type ODRE-M
Alternative outlet
Type ODRE-M
Part no. 13 504 50 h
Oil pressure regulator type ODR, ODR Bio and ODRE-M
with T- screw
when the inlet pressures are between 0.5bar and 10bar, the outlet
pressure is in a range between 0 bar and 2.5bar
approx. 1bar (closing pressure)
reduced, the outlet pressure increases regardless of the outlet pressure
that is set
Compression fitting
• optionally compr. fit 6, compr. fit 8, compr. fit 10, compr.
fit 12, compr. fit 15
• according to EN ISO 8434-1 and DIN 2353
Trading name and dimensions
acc. to standard
Trading name and dimensions acc. to standard
Cylindrical female thread G 1/4 acc. to EN ISO 228-1,
O-ring dimensions 9x2 mm, included with delivery
Screw-in connectors, type B acc. to EN ISO 1179-4
Example: Screw-in connector with cylindrical male
thread G 1/4 GOK Type GERB
Trading name and dimensions acc. to standard
Cylindrical female thread G 3/8 acc. to EN ISO 228-1,
O-ring dimensions 14x2 mm, included with delivery
Screw-in connectors, type B acc. to EN ISO 1179-4
Example: Screw-in connector with cylindrical male
thread G 3/8 GOK Type GERB
3 / 6