GOK SmartBox 4 Montage- Und Bedienungsanleitung Seite 40

®
SmartBox 4
Excess voltage!
Damage to components and device defect.
No 230 V AC connections may be made to terminals 3 + 4 and 5 + 6 or probe input
terminals 1 + 2!
Connetion of the interface SmartBox
Via the integrated interface "SERIAL LINK INPUT" (terminals 3 + 4), a maximum of three
additional indicators SmartBox
additional tanks (tank 2 to tank 4) can be telecommunicated.
®
For SmartBox 1 and 2, the two-pole output terminal "Serial Link Output" (terminals 3 + 4) is
con-nected to terminals 3 + 4 (terminal 3  3 and 4  4) of the SmartBox
cable (e. g. 2 x 0.4 mm²).
If the tanks should be numbered in a defined sequence (tank 2 to 4), then SmartBox
be activated first, followed by the other indicators in the desired sequence.
®
SmartBox 4 PRO
8 / 32

SIM-
card
®
4 to SmartBox
®
1, 2 or 3 can be connected and the measured values for the
®
SmartBox 4 / SmartBox
®
1, 2 or 3
®
®
4 PRO
4 with a two-core
®
4 must
part no. 28 400 57 c