Specifications; Power Cord; Over Current Protection - Stryker XPRT Bedienungs- Und Wartungshandbuch

SPECIFICATIONS

Model
Dimensions
Weight Complete system
Safety working load

Power Cord

Over Current Protection

Voltage
Operating Ambient Temperature Range
Storage Temperature
Output Flow Rate
Current Leakage
Classification
www.stryker.com
Introduction
2950-200-002 Dartex Cover
Support surface 84" x 35" x 8 .5"
115 lbs
500 lbs
3 feet, 16 AWG cord with hospital grade plug for use with accessory
outlet on FL27 InTouch bed frame
3 fuses - (2) Fuses 5 x 20 mm ., 6 .3A Slo-blo, 250 VAC, (1) Fuse (F1)
1/4 x 1 1/4 in ., 7A Slo-blo, 250 VAC
120 VAC +5% -10% VAC, 2 .5A 50/60 Hz
60°F - 85°F
If the product is stored at temperatures below 60°F or above 85°F,
the product must be allowed to stabilize for two hours within the
specified operating temperature range before use .
12 .5 LPM (0 .4 SCFM) minimum @ 30 mmHg
300 µA Maximum
Class I, grounded equipment
Class II, FDA and Health Canada
Type BF equipment
Continuous operation - Not suitable for use in the presence of
flammable anesthetic mixture with air or with oxygen or nitrous
oxide . Suitable for continuous duty .
IPX4, Splash Proof
Medical equipment: Classified with respect to electric shock,
mechanical hazards only, in accordance with IEC60601-1 CAN/CSA
C22 .2 No . 601 . 1 .-M90
Electromagnetic compatibility, meets IEC60601-1-2 (CISPR 11
classified as Class A, Group 1 ISM equipment)
2950-109-005 REV B
213 .4 cm x 88 .9 cm x 21 .6 cm
52 .2 kg
226 .8 kg
16°C - 30°C
Return To Table of Contents
English
1-7