Check Hydraulic Oil Level - Jungheinrich EFG 430 Betriebsanleitung

6.4

Check hydraulic oil level

M
The load lifting device must be completely lowered.
–– Prepare truck for the servicing and
maintenance operations
(refer to section 6.1).
–– Unscrew air filter with dipstick (2).
–– Visually check hydraulic oil level at
dipstick (3).
Z
If the tank is sufficiently filled the hydrau-
lic level must be readable at the upper
marking (4).
–– If required, refill hydraulic oil up to the required level (10 mm at dipstick (3) corre-
spond to approximately 1 l hydraulic oil).
M
Do not overfill hydraulic tank above the upper marking, as this may result in malfunc-
tions and damages of the system.
Used consumption-type materials must be disposed of in accordance with the appli-
cable environmental protection regulations.
F
Trucks with bio hydraulic oil have a warning notice on the
hydraulic reservoir: “"Fill only with hydraulic oil”". Use only bio
hydraulic oil, see “"Lubricants”" section.
2
max.
min.
f09unten
3
4
F 9