4.8
Collecting, transporting and depositing loads
M
Before lifting a load, the driver must ensure that it is correctly palletised and that the
capacity of the truck is not exceeded.
Note the load chart.
Adjusting the forks
F
Adjust the forks in such a way that both
are equally distanced from the outer
edge of the fork carriage and the load
centre of gravity lies in the middle of the
forks.
– Raise the locking lever (115).
– Push the forks (114) to the correct
position on the fork carriage (116).
– Turn the locking lever down and move
the fork tine until it engages in a slot.
Lifting a load
– Carefully approach the load to be
lifted.
– Apply the parking brake (3).
– Set the mast vertical.
– Raise the forks to the correct height for
the load.
E 36
114
116
3
115