Jungheinrich EFG 430 Betriebsanleitung Seite 66

Forward travel (single pedal)
F
Make sure that the travel area is clear.
–– Release the parking brake (3)
–– Push the travel direction switch ( 103 /
14 / 32) on the MULTI-PILOT / SOLO-
PILOT /multifunction steering wheel
forward
–– Slowly apply the accelerator pedal (6)
Forward travel (twin pedal)
F
Make sure that the travel area is clear
–– Release the parking brake (3)
–– Slowly apply the accelerator pedal
(13)
F
Do not move the MULTI-PILOT to travel.
Changing direction (single pedal)
F
Before setting off in the opposite
direction, make sure that the reverse
travel area is clear.
–– Take your foot off the accelerator
pedal (6).
–– Applying the brake pedal (7), bring the truck to a halt.
–– Push/pull the travel direction switch (103 / 14 / 32 ) back.
–– Slowly apply the accelerator pedal until you reach the required travel speed.
Changing direction (twin pedal)
F
Before setting off in the opposite direction, make sure that the reverse travel area is
clear.
–– Take your foot off the accelerator
pedal (13).
–– Applying the brake pedal (12), bring
the truck to a halt.
–– Slowly apply the accelerator pedal
(11) until you reach the required travel
speed.
103
R V
7
3
6
E 27