Controls And Displays - Jungheinrich EFG 430 Betriebsanleitung

2

Controls and Displays

Item Control /
Display
1 Steering wheel
2 Multi-function display
3 Parking brake (toggle
switch)
4 Steering column stop
5 Key switch
6 Accelerator pedal
7 Brake pedal
8 Travel direction switch
MULTI PILOT
Horn
Auxiliary hydraulics (ZH3)
9 Optional equipment
switch
10 EMERGENCY
DISCONNECT isolator
11 For dual pedal control:
“"Reverse”" accelerator
pedal
12 For dual pedal control:
Brake pedal
13 For dual pedal control:
“"Forward”" accelerator
pedal
14 Travel direction switch
15 Horn
16 SOLO-PILOT
Lift - Lower
17 SOLO-PILOT
Mast - tilt
18 SOLO-PILOT
Auxiliary hydraulics (ZH1)
Sideshift
19 SOLO-PILOT
Auxiliary hydraulics (ZH2)
20 Toggle switch
Auxiliary hydraulics (ZH3)
t = Standard equipment
E 2
Function
t Steers the truck with 5 full turns from left to right.
t Displays the main travel, lift parameters, warning
displays, error messages and service displays, as
well as battery discharge and elapsed hour display.
t Only apply manually when operating brakes fail.
Normally the parking brake (spring-loaded
accumulator brake) automatically applies when the
truck is idle.
Visual display:
Red = Parking brake applied
Green = Parking brake released
t To adjust and fix the steering column to the required
distance.
t Switches current on and off. Removing the key
prevents the truck from being switched on by
unauthorised personnel.
t The travel speed is infinitely controlled.
t Brakes the truck.
o
Sets the required travel direction.
o
Controls the lifting mast functions.
o
Triggers a warning signal.
o
Toggles from ZH2 to ZH3
o e.g. display for work lights on
t Switches power supply on and off.
o The truck travels in reverse direction when applied
The travel speed is infinitely controlled.
o Brakes the truck.
o The truck travels forward when applied
The travel speed is infinitely controlled.
t Sets the required travel direction.
t Triggers a warning signal.
t Lifts / lowers the forks
t Tilts the forks forward / backward.
o Moves the forks to the right / left.
o Used for hydraulic attachments.
o Toggles from ZH2 to ZH3
o = Optional Equipment