Check Hydraulic Oil Level - Jungheinrich EFG-Vac 25 Betriebsanleitung

6.4

Check hydraulic oil level

m
The load lifting device must be completely lowered.
–– Prepare truck for the servicing and
maintenance operations
(refer to section 6.1).
–– Unscrew air filter with dipstick (2).
–– Visually check hydraulic oil level at
dipstick (3).
A
If the tank is sufficiently filled the
hydraulic level must be readable at the
upper marking (4).
–– If required, refill hydraulic oil up to the required level (10 mm at dipstick (3)
correspond to approximately 1 l hydraulic oil).
m
Do not overfill hydraulic tank above the upper marking, as this may result in
malfunctions and damages of the system.
Used consumption-type materials must be disposed of in accordance with the
applicable environmental protection regulations.
2
max.
min.
f09unten
3
4
F 9