Adjusting The Driver’'S Seat - Jungheinrich EFG 430 Betriebsanleitung

3.3

Adjusting the driver’'s seat

Z
To achieve optimal seat cushioning, the driver’'s seat must be adapted to the driver’'s
weight.
The driver’'s seat must be adapted to the driver’'s weight.
Adjusting the driver's weight:
–– Pull the “"driver’'s seat”" weight adjuster
(92) in the direction of the arrow as far
as the stop and then return it.
Z
The previous weight setting is reset to
the minimum
suspension can be set from 50 kg to
130kg
–– Move the
adjuster (92) again in the direction of
the arrow until the corresponding
weight marking on the “"driver’'s seat”"
weight display (93) is reached. Now
return the “"driver’'s seat”" weight
adjuster.
–– Sit on the driver’'s seat.
Adjusting the backrest:
–– Lift up the backrest adjuster (94) and
adjust the backrest tilt.
–– Release the backrest tilt adjuster (94)
to lock the backrest in position.
Adjusting the seat position:
–– Pull up the longitudinal adjuster (95)
and push the driver’'s seat forwards or
backwards to the desired position.
–– Engage driver’'s seat lock (95) in
position again.
––
F
The driver’'s seat must be securely locked in the desired position. The driver’'s seat
setting must not be changed during travel.
Z
The procedure for adjusting the driver’'s seat applies to standard models. For other
models, follow the manufacturer’'s setting instructions. When adjusting the seat make
sure that all controls are within easy reaching distance.
value. The
“"driver’'s seat”" weight
seat
94
93
94
93
95
92
95
92
E 17