Operating The Lift Mechanism And Attachments (Solo-Pilot) - Jungheinrich EFG 430 Betriebsanleitung

4.6 Operating the lift mechanism and
attachments (SOLO-PILOT)
F
The SOLO-PILOT
operated from the driver’'s seat. The
driver must be instructed in how to
operate the
attachments.
Lifting/lowering the fork carriage
–– Pull the SOLO-PILOT (16) back to
raise the fork carriage.
–– Press the SOLO PILOT (16) to the
front to lower the fork carriage.
Titing the mast forward / backward
F
When tilting the mast back, ensure no
part of your body is between the mast
and the front panel.
–– Pull the SOLO-PILOT (17) back to tilt
the mast back.
–– Push the SOL-PILOT (17) forward to tilt the mast forward.
4.6.1 Controlling Attachments (SOLO-PILOT) (o)
F
Note the manufacturer’'s operating instructions and the capacity of the attachment.
Do not lift other people with the lifting device.
–– Pull the auxiliary hydraulics control lever ZH1 (18) backwards or push it forward to
control the attachment (e.g. sideshift).
–– Pull the auxiliary hydraulics control lever ZH2 (19) backwards or push it forward to
control the attachment (e.g. fork positioner).
–– You can use button (20) to toggle the ZH2 control lever (19) to auxiliary hydraulics
ZH3.
The auxiliary hydraulics ZH3 can only be activated when the button (20) is pressed
and the control lever is in the neutral position. To control the attachment, pull the
SOLO-PILOT ZH2 lever (19) back or push it forward. The auxiliary hydraulics ZH3
are deactivated when the button (20) is released and the control lever has returned
to the neutral position.
Moving the lever controls the lift speed of the hydraulic cylinder.
When the lever is released it automatically reverts to neutral and the lifting device
remains in the position it has reached.
M
Always apply the control lever sensitively, never with a sudden jerk. Release the
control lever as soon as the lifting device reaches the limit position.
must only
lifting unit and
be
the
16 17
20
18 19
E 33