Charger Socket (O) - Jungheinrich EFG 430 Betriebsanleitung

5.1

Charger socket (o)

–– Park the truck securely (see chapter E)
F
Always connect and disconnect the battery and charger when the charger is switched
off.
–– Connect the charger lead of the bat-
tery charger station to the charger
socket (6).
–– Depending on the battery you may
need to connect the water (5) to the
battery charger station.
The charging process is monitored elec-
trically. The truck is automatically pre-
vented from being operated and a fan
inside the truck is activated to ventilate
the battery.
F
Always check the fans each time you
charge.
–– Switch on the battery charging station and charge the battery in accordance with
the battery and charging station manufacturers’' instructions.
Z
Use only chargers with a max. 160 A charging current.
F
It is essential to follow the safety regulations of the battery and charging station man-
ufacturers. The fan must be in permanent operation during charging to allow the
charging gases to dissipate. Do not use fire or naked flames. Risk of explosion!
D 6
6
5
6
5