C Transportation and commissioning
1
Transportation by crane
M
Only lifting gear of adequate capacity
must be used
(loading weight = own weight + battery
weight; see identification plate of the
truck).
– Safe parking of the truck
(refer to chapter E)
– Fasten hoisting gear at lifting mast
crossbeam (1) and at trailer coupling
(2).
M
Transporting by crane is only provided
for transport for first commissioning.
For application conditions that require
frequent shipment (changing usage lo-
cations) it is required to consult the man-
ufacturer.
M
Hoisting belts or chains may only be
hooked into the top lug of the counter-
weight and the lugs of the end cross-
head (lifting mast).
The lifting mast must be fully tilted back.
The hoisting belt or chain at the mast
must have a minimum free length of
2 m.
M
The crane hoisting gear must be at-
tached in such a way that it cannot touch
any attached components or the over-
head guard during lifting.
1
2
C 1