Warning Registration On Driver’'S Display - Jungheinrich EFG 430 Betriebsanleitung

2.6

Warning registration on driver’'s display

Display
INFO 02
INFO 05
INFO 16
INFO 35
INFO 36
INFO 40
INFO 90
INFO 96
Meaning
- No direction selected when truck powered up, no wheel
position displayed
-Travel direction changed to neutral setting during operation,
wheel position display alternates between forward and
reverse.
(Optional setting for travel cutout input)
Lift cutout active / independent of other conditions
(Optional setting for travel cutout input)
Travel cutout active / independent of other conditions
Accelerator pedal zero position
-Message can be adjusted to suit preference –– either the zero
position is only checked after power up or after every transition
of the seat switch from the open to closed position.
Hydraulics zero position
-Message can be adjusted to suit preference - message
displayed or not.
Overtemperature
Traction or lift controller above 83°C.
Traction or lift controller above 145 °C.
Travel with handbrake on
-Accelerator pedal applied while the handbrake switch is set to
parking position.
Hydraulics zero position on power up
-a hydraulic function applied during power up
-the hydraulic function applied will not be performed.
E 15