Fork Arm Load Diagram (Basic Device); Attachment Load Diagram - Jungheinrich EFG 430 Betriebsanleitung

Example for determining the maximum carrying capacity:
At a load centre distance of D = 600 mm and maximum lifting height H = 3,600 mm
the maximum carrying capacity Q = 1,105 kg.
4.3

Fork arm load diagram (basic device)

The fork arm load diagram indicates the carrying capacity Q of the truck in kg. In the
diagram the maximum carrying capacity for different load centres D (in mm) is shown.
4.4

Attachment load diagram

The attachment load diagram indicates the carrying capacity Q of the truck in connec-
tion with the respective attachment in kg. The attachment serial number indicated in
the load diagram must correspond to the ID plate of the attachment, since the manu-
facturer must state the carrying capacity specially for each attachment. It is indicated
in the same way as the carrying capacity of the truck itself and must be determined
accordingly.
The arrow markings (42 and 43) at the
inner respectively outer mast indicate to
the driver that the lift limitations pre-
scribed in the load diagram have been
reached.
42 43
B 13