3.6
Adjusting the steering column
– Loosen the steering column lock (4)
and push the steering column forward
or back into the desired position.
– Retighten the steering column.
Height adjuster (o)
Pull the lever (30) up and set the
steering wheel to the required height.
3.7
Preparing the truck for operation
– Unlock the isolator (10).
– Push in the rocker (s) and pull it up (r)
until you feel the isolator engaging (o)
on trucks with multifunction armrest
unlock
DISCONNECT (22).
– Insert the key in the key switch (5) and
turn it clockwise as far as it will go to
the "I" position.
– Test the horn (99)..
F
Test the electric, hydraulic and parking
brakes.
– The truck is now operational. The
information and service display (2) /
control panel (21) shows the available
battery capacity.
Z
When
you
EMERGENCY
turned the key switch to the right, the
truck carries out a self test for approx.
3-4 seconds (tests the controllers and
motors). During this time the truck
cannot move. If the accelerator pedal is
applied during this time, the display will
show "Zero drive sens".
E 22
the
EMERGENCY
have
applied
DISCONNECT
30
99
the
and
2
4
5
99
10
21
22