Servicing And Inspection - Jungheinrich EFG 430 Betriebsanleitung

3

Servicing and inspection

Thorough and expert servicing is one of the most important preconditions for safe
operation of the forklift truck. Failure to perform regular servicing can lead to truck
failure and poses a potential hazard to personnel and equipment.
M
The application conditions of an industrial truck have a considerable impact on the
wear of the service components.
We recommend that a Jungheinrich customer service adviser carries out an
application analysis on site to work out specific service intervals to prevent damage
due to wear.
The service intervals listed are based on single shift operation under normal
operating conditions. They must be reduced accordingly if the truck is to be used in
conditions where there is heavy dust, temperature fluctuations or multiple shifts.
The following maintenance check list gives the tasks and times at which they should
be carried out. Maintenance intervals are defined as:
W = Every
A = Every
B = Every 1000 service hours, or at least six months
C = Every 2000 service hours, or at least annually
Z
W service intervals are to be performed by the customer.
In the run-in period - after approx. 100 service hours - or after repair work, the owner
must check the wheel nuts/bolts and re-tighten if necessary.
50 service hours or at least weekly
500 service hours
F 3