2
Securing the truck during transport
M
The fork lift truck must be properly secured with wedges and restraints during trans-
port on a lorry or trailer. The lorry or trailer must be equipped with lashing rings and a
wooden floor. Perform loading with suitably trained specialist staff according to the
recommendations of VDI 2700 and VDI 2703 guidelines. Correct dimensioning and
implementation of load securing measures is required for every separate case.
Z
To lash down the fork lift truck with the lifting mast installed use the eyes on the top
cross beam of the mast and the trailer coupling pin.
Z
To transport the fork lift truck without lifting mast perform lashing across the overhead
guard front.
C 2
Lashing and wedging with the lifting mast installed
Lashing and wedging without lifting mast