Integrated Sideshift (o)
The fork carriage can be moved sideways using the integrated sideshift.
– Pull the auxiliary hydraulics control lever ZH1 (18) back = sideshift right.
– Push the auxiliary hydraulics control lever ZH1 (18) forward = sideshift left.
Integrated fork positioner (o)
The integrated fork positioner allows the distance between the forks to be set.
– Pull the auxiliary hydraulics control lever ZH2 (19) back = forks together.
– Push the auxiliary hydraulics control lever ZH2 (19) forward = forks apart.
Z
The fork positioner can be synchronised to ensure the forks are even. The forks must
be spread apart as far as the stop and then brought back together.
Other Attachments
Additional equipment can only be attached with written permission from the
manufacturer, see chapter A "Attaching Accessories".
manufacturer's operating instructions when using other attachments.
The control levers of the attachments must be indicated by symbols to illustrate the
function of the attachment.
M
Only use attachments that have CE approval. The reduced residual capacity must be
re-calculated and indicated by a separate capacity plate.
E 34
Always follow the