Towing Trailers; Tow Loads - Jungheinrich EFG 430 Betriebsanleitung

4.10

Towing trailers

The truck can occasionally be used to tow a light trailer on a dry, level and well
maintained surface.
Z
The max. tow load is the capacity indicated on the capacity data plate (see decals
diagram in chapter B).
The tow load consists of the weight of the trailer and the stated capacity.
If a load is transported on the forks, the tow load must be reduced by the same
amount.
F
Important notes for safe towing
–– A truck must not be continually operated with trailers.
–– No supporting loads are permitted.
–– The maximum speed is 5 km/h.
–– Towing must only be performed on level, secure travel routes.
–– Follow the instructions of the coupling manufacturer if using special trailer
couplings.
–– The owner must test trailer operation with the permissible tow load by means of a
trial run under the applicable operating conditions in the field.
Attaching the trailer
–– Push the tow pin (117) down and turn
it 90 degrees.
–– Pull the tow pin up and insert the tiller
of the trailer vehicle into the opening.
–– Insert the tow pin, push it down, turn it
90 degrees and engage it.
4.11

Tow loads

M
Before coupling, the driver must ensure
the maximum
exceeded.
E 40
trailer load is not
117