Adjusting The Steering Column; Provide Operatability - Jungheinrich EFG-DH ac 10 Betriebsanleitung

Backrest adjusment:
–– Pull backrest adjustment (11) up and adjust backrest (50) inclination.
–– Release backrest adjustment (11), backrest locks in.
Adjusting the seat position:
–– Pull locking of driver's seat (14) out and adjust the desired seat position by moving
the seat forward or backward.
–– Release locking of driver's seat (14) to arrest the seat.
f
The driver`s seat locking must be securely arrested in the adjusted position. The driv-
er`s seat adjustment must not be changed while driving the truck!
A
The driver`s seat adjustment relates to the standard equipment. Use the adjustment
instructions of the supplier if the truck equipment deviates from the standard. When
adjusting the seat your have to make sure that all operating controls can be
easily reached.
5.3

Adjusting the steering column

–– Release steering column lock (3) and
push or pull steering column to the de-
sired position.
–– Tighten steering column lock again.
5.4

Provide operatability

–– Unlock master switch (7).
To do this:
Push rocker (s) in and pull it upward
(r) until you notice that the master
switch locks in.
–– Put key into the key switch (5) and turn
right until stop to position “"I”".
–– Check function of horn key (51).
f
Check function of electric and hydraulic
brake and parking brake.
The truck is now operative. The multi
function display (1) indicates the remain-
ing battery capacity.
A
After pulling the EMERGENCY OFF and turning the key switch clockwise the truck
executes a selftest for approximately 3 to 4 seconds (controls and motors are
checked). During this period travelling movements are not possible.
E 12
7 1 3
51
5