Damages Or Breakdowns Research And Moving Elements Unblock - Lachinger 2200/S05 Gebrauchsanweisung

6.5. DAMAGES OR BREAKDOWNS RESEARCH AND MOVING ELEMENTS
UNBLOCK
Before to proceed to any intervention or investigation:
1. Signal, with a sign, that you are performing the maintenance.
2. Before to restart the machine, check always that there aren't personnel that are performing cleaning
and/or maintenance operations.
3. For the controls and the little electric repairs make intervene exclusively qualified and regularly skilled
professional electricians and/or electro technicians.
4. For the mechanical reparations contact absolutely, always, the Authorized Assistance Centre.
5. Consult always and in every case the Authorized Assistance Centre in the ways showed in the first pages
of the present manual.
Here follow the interventions for the damages or breakdowns research and moving element unblock are showed that can
be performed from maintenance men, having professionalism, in accordance with what defined in the paragraph 6.1.
TYPE
General black out
Fuses or magneto thermals placed upstream of the
Net voltage lacking
machine feeding line
Protection device inside the machine
Functioning
breaking
Cause/s not identifiable
Feeding voltage lacking.
Sectioning devices placed on "OFF".
Intervened fuses or not functioning magneto
The machine
thermals.
doesn't function:
the bowl and the
Lacked running button functioning
tool don't rotate
Thermal intervention due to the overheating
10-2009-IMPASTATRICI-A5.doc
POTENTIAL CAUSES
ORIGINAL INSTRUCTIONS TRANSLATION
MODALITY AND CHECKS
Contact the electric energy distributor
After having eliminated the causes that have
determined the protection device intervention,
restore it. In case of problem persistency contact
an electrician.
Contact an electrician technician: after having
eliminated the causes that have determined the
protection device intervention, restore it.
In case of fuses intervention, change them with
types of the same model, calibration and
intervention curve.
Contact directly the Authorized Assistance
Centre
Check and restore the electric energy.
Turn the sectioning devices in the position
"ON"
Make change the intervened fuses, check the
magneto thermal switches condition.
Check the START button efficiency and
eventually contact directly the Authorized
Assistance Centre.
Wait the complete cooling before the machine
restarting
Pag.
28
di
31