Functioning Description - Lachinger 2200/S05 Gebrauchsanweisung

MOVING SHELTER OPENING
Lifting the interblocked moving shelter, the machine stops immediately for the safety micro switch functioning.
The machine can be restarted only after have lowered the shelter up to its lowest position, following successively the function
of "STARTING".
TIP-UP HEAD LIFTING
After the knob unblock placed in the machine left side, lifting the tip-up head, the machine stops immediately for the safety
micro switch functioning.
The machine can be restarted only after have lowered the head up to its lowest position, following successively the function of
"STARTING"".
BOWL REMOVAL
After have lifted the tip-up head, removing the bowl, the machine remains in the stop position also after have lowered the
machine head, for the safety micro switch functioning.
The machine can be restarted only after have reintroduced the bowl, lowered the head up to its lowest position, following
successively the function of "STARTING".
5.7.

FUNCTIONING DESCRIPTION

CONTROLS AND VERIFICATIONS BEFORE THE SET IN FUNCTION
VERIFICATION / CONTROL
Verify that:
Strange objects aren't on the machine, within the
bowl
Verify the cleaning:
Of the bowl internal parts, the tool, the moving
shelter,
Of the machine external surface
Verify the integrity:
Of the fixed protections,
Of the moving shelter,
Of the bowl,
Of the machine body
Verify the functionality:
Of the control system parts / control about the
safety;
Of the control devices.
Verify the absence:
Of strange noises after the starting
For any intervention or for the parts change that prove damaged, activate the maintenance service. The possible change must
happen with original products of the manufacturer or at least of same quality, safety and characteristics. For investigations
contact the Authorized Assistance Centre.
10-2009-IMPASTATRICI-A5.doc
MODALITY AND CHECKS
Visual control of the showed parts, to check the absence of
objects or strange bodies as for example various tools,
clothes, etc.. and that there isn't however the food product.
In case of presence provide to their removal.
All the showed parts surfaces, before the machine use must
be checked visually to check their cleaning.
For the visual control of the bowl internal parts provide the
moving shelter lifting.
In case of moulds presence or other type of dirt, provide the
cleaning procedure in accordance with the indication of the
chapter "CLEANING"
All the fixed shelters, moving, etc.. must perform the
function for which have been foreseen.
Visual check of the showed parts to check their integrity in
their surface external part.
The parts must be however changed to the first erosion signs
or breaking.
All devices must perform the function for which have been
foreseen. Control directly the devices so that these ones
determine the waited function.
The actuators and all parts must be however changed to the
first erosion signs or breaking.
During the functionality check of the control devices, in the
case there are strange noises, due for example to mechanical
breaks, stop immediately the machine, and activate the
maintenance service.
ORIGINAL INSTRUCTIONS TRANSLATION
Pag. di
23 31