Technical Data - Reely RAMBO Racing 7.5 RTR Bedienungsanleitung

8.

Technical Data

Engine:
7,54 ccm Combustion engine
with ABC assembly, two chamber resonance exhaust silencer and slide carburettor
Displacement:
Power:
Engine speed:
Bore:
Stroke:
Weight:
Fuel:
Tank capacity:
Lubrication:
Air filter:
Power transmission:
All-wheel drive:
Automatic two-speed transmission
Transmission ratio:
Chassis:
Chassis frame:
Front wheel suspension:
Rear wheel suspension:
Brake:
Suspension:
Measure and weight
(dimensions excluding body)
Total length
600 mm
6
Wheel base Width
430 mm 395 mm
7,54 ccm
,4 kW / 3,3 HP
7.000 - 8.000 rpm
 mm
19,6 mm
approx. 65 g
RC car model fuel on a methanol/oil basis
with a min. share of 5% - 5% nitromethane and 16% synthetic oil
15 ccm
self lubricating
foam – dry filter
via cardan shafts to front and rear axles
enclosed differential in the front and rear axle,
All drive axles are mounted with ball bearings.
1. Rate of speed 4,64 (65T: 14T)
. Rate of speed 3,16 (60T: 19T)
with one-way bearing, centrifugal clutch
Support plate made of Duralumin, extremely light, firm and warp resistant
damper plates made of aluminum, CNC machining
two reinforcing cross-ties
Twin control arm suspension
Clamping screw in the upper transverse control arm
Twin control arm suspension
Clamping screw in the upper transverse control arm
(inclination front / rear adjustable)
Disk brakes with aluminum disks,
special brake pads at the rear axle drive and at the front axle drive
Spring struts with aluminum oil dampened shock absorbers,
spring preload via screw rings, adjustable,
steering point adjustable
Wheel track
335 mm
Operating Instructions 4WD GP BUGGY RAMBO RACING 7,54 RtR No. 3 51 85
Height Weight with engine
(as in delivery)
225 mm 4250 g