Olympus WS-110 Bedienungsanleitung Seite 5

• To ensure successful recording, make a test recording to choose
appropriate microphone sensitivity before recording.
• If you choose "Conferences", we recommend setting the recording
mode to Stereo XQ, Stereo HQ, Stereo SP or HQ to best take advantage
of the higher sensitivity.
• If you choose "Conferences", background noise may be high depending
on the recording conditions.
` Microphone sensitivity display
Using The Variable Control Voice Actuator (VCVA)
(Fig. ¨)
When the microphone senses that sounds have reached a preset
threshold volume level, the built-in Variable Control Voice Actuator
(VCVA) starts recording automatically, and stops when the volume
drops below the threshold level.The VCVA feature extends recording
time and conserves memory by stopping recording during silent
periods, which helps the playback to be more efficient.
In Menu mode selection
1. Press the 9 or 0 button adjust the pause sound level.
The VCVA level can be set to any of 15 different values.
The higher the value, the more sensitive the recorder to sounds.
At the highest value, even the faintest sound will activate
recording.The VCVA pause sound level can be adjusted
according to the ambient (background) noise.
` VCVA Level
1 Start level (moves to the right/left according to the set level)
• The record/play indicator light is lit during recording. When the recorder
is in Standby mode, the record/play indicator light flashes and
flashes on the display.
• The start/stop actuation level also varies depending on the selected
microphone sensitivity mode.
• If the starting level is not adjusted within 2 seconds, the display will
return to the previous.
Q VCVA indicator W Display in the stereo recording mode
Set the LowCut Filter (LowCut) (Fig. ⁄)
The recorder has a LowCut Filter function to minimize low-frequency
sounds and record voices more clearly. This function can reduce
noise from air conditioners, projectors and other similar noises.
` LowCut Filter indicator
In Menu mode selection
Set the Voice Filter (Voice Filter) (Fig. ø)
The recorder has a Voice Filter Function to cut low and high
frequency tones during normal, fast, or slow playback, and enable
clear audio playback. ` Voice Filter indicator
In Menu mode selection
Changing the Playback Speed
(Slow Speed/Fast Speed)
The playback speed of the file can be changed between 0.5 and
1.5 times speed in increments of 0.125. Change the speed
according to need such as listening to meeting content at a fast
speed or reviewing spots that you couldn't catch in a language
lesson at a slow speed. The tone will be automatically adjusted
digitally without changing the voice so it sounds natural.
Change Playback Speed (Fig.
t
Press the button Every time the
while playing a file. the playback speed will switch.
Normal Speed
VCVA OFF, VCVA ON
LowCut OFF, LowCut ON
Voice OFF, Voice ON
π
)
t
button is pressed,
Slow Speed Fast Speed
(–25%) (+50%)
Even if playback is stopped, the changed playback speed will be
retained. The next playback will be at that speed.
Change Playback Speed Setting
The playback speed setting of "Slow Speed" and "Fast Speed"
can be changed from the menu setting.The setting can be changed
either while in stop mode or during playback.
1. Press and hold the 2 (MENU) for 1 second or longer to
go to the mainmenu.
2. Press the 9 or 0 to select "Slow Speed" or
"Fast Speed", and press
The setting of "Slow Speed" or "Fast Speed" starts.
` Setting during playback
3. Press the 9 or 0 to select the playback speed to set,
t
and press button.
Slow Speed: x0.5, x0.625, x0.75, x0.875
Fast Speed: x1.125, x1.25, x1.375, x1.5
Goes back to the setting screen of "Slow Speed" or "Fast Speed".
4. Press the 5 button to exit the menu mode.
• When the slow playback mode is selected, the
for the fast playback mode,
recorder is playing back.
• If the recorder goes to the menu screen during playback, move the
cursor to change playback sound accordingly.
Continuous Playback (All Play) (Fig. ‚)
Also after the playback of the current file, all the files within the
folder can be continuously played back.
In Menu mode selection
• To play all the files within the folder, select "AllPlay ON". When the last
file finishes being played back, "File End" is displayed and playback
stops.
Locking Files (File Lock) (Fig. ∂)
Locking a file keeps important data from being accidentally erased.
Locked files are not erased when you choose to erase all files from
a folder. ` Erase lock indicator
In Menu mode selection
System Sounds (Beep) (Fig. ƒ)
Informs a button operation or a wrong operation of the recorder by
sound. System sounds may be turned off.
In Menu mode selection
LED (LED) (Fig. ©)
You can set it so the Record/Play indicator light does not turn on.
In Menu mode selection
LCD Contrast Adjustment (Contrast) (Fig. ª)
Display contrast can be adjusted in 12 levels.
In Menu mode You can adjust the LCD display
selection contrast level from 1 to 12.
Viewing System Information (System Ver.) (Fig. º)
You can check the recorder's information on the menu screen.
System Information Recorder's Version
Formatting the Recorder (Format) (Fig. Δ)
If you format the recorder, all files will be removed and all function
settings will return to defaults except date and time settings.
Transfer any important files to a computer before formatting
the recorder.
t å
button. (Fig. )
appears and,
appears on the display while the
AllPlay OFF, AllPlay ON
Lock OFF, Lock ON
Beep OFF, Beep ON
LED OFF, LED ON
EN 9