F) Deleting The Model Data - ModelCraft 23 10 21 Bedienungsanleitung

f) Deleting the model data

To delete the data in one model memory, proceed as follows:
• Press the set button (fig. 1, no. 12), hold it and switch the transmitter on and select the
model memory you wish to delete (0...9).
• Wait for the display to show operation mode display.
• Now press the set button again for 5 seconds.
• As a confirmation, the transmitter emits a single beep and the data of the model memory
are re-set to the default settings.
To delete the data in all model memories, proceed as follows:
• Press the set button (fig. 1, no. 12), hold it and switch on the transmitter.
• Briefly release the set button and press the button again for 5 seconds.
• As a confirmation, the transmitter emits a single beep and the data of all model memories
are re-set to the default settings.
62