Corrosion Protection - Otto Bock A200 Gebrauchsanweisung

Technical Data
Corrosion protection
Corrosion protection Powder-coated frame
* 3-point turn by 180°
** The specified weights vary according to the selected options and model.
*** The product meets all requirements under ISO 7176-14.
**** Depending on the individual, the continuous climbing ability can be significantly lower than the value specified.
***** T he specified range was determined under defined conditions according to ISO 7176-4. In practice the range can be reduced by up to 50 %. For
information on this, see the section „Range" in the instructions for use (user).
****** T he braking distance can be correspondingly longer due to user weight, installed options and condition of the tyres, and due to weather and sur-
face conditions.
Technical changes reserved.
Table 7 Technical data
138 Ottobock A200
|