Switching On And Off - Otto Bock A200 Gebrauchsanweisung

Operation
Speed buttons
Pressing the speed buttons shortly increases or reduces the
speed level. After reaching the maximum speed level, the
acoustic signal is changed.
Joystick
The joystick controls the direction and speed of travel.
Horn
The horn will sound as long as the horn key is being pressed.
Battery Capacity LED indicator
The LEDs show the battery capacity (see section 6.3.4)
Speed Level indicator
The LEDs show the currently selected speed level.
6.3.2 Switching On and Off
WARNING
Danger to life if the brake fails to function. The brake re-
lease lever must be locked when using the power
wheelchair. The automatic brakes must be operational
and functional.
106 Ottobock
|
CAUTION
Risk of accident as a result of a wrong tyre pressure.
The power wheelchair must be visually checked every time
before it is used to make sure that the tread depth is suf-
ficient and that the tyres are inflated to the correct tyre
pressure. Incorrect tyre pressure reduces the tyres' ser-
vice life and makes the wheelchair's driving behaviour wor-
se.
The control panel of the power wheelchair is turned on or off
by pressing the on/off key (see fig. 20, item 6). If the control
panel is not used for an extended period of time, the
wheelchair turns off automatically. It is also possible to switch
off the power wheelchair with the on/off key during driving. In
this case, the wheelchair brakes immediately until it stops.
INFORMATION
Every time you switch on the control unit, it will return to the
previously selected speed level.
A200