Control Panel; Fig. 20 Control Panel - Otto Bock A200 Gebrauchsanweisung

NOTICE
Damage of other devices. The power wheelchair can ge-
nerate electromagnetic fields that can cause interference
with other devices. Therefore, switch off the controls whe-
never you do not need them.
6.3.1 Control panel
The control panel is used to control the power wheelchair.
The control panel consists of a keypad, LED display and
joystick. The charging/programming receptacle is on the un-
derside. The control panel is used to switch the power
wheelchair on and off, to enter driving commands and to
display the current state of certain functions and compo-
nents.
A200
7
5
2
Fig. 20 Control panel
1 Joystick
2 S peed button
slow
3 S peed buttons
fast
4 S peed level indicator
(LED display)
On/Off key
The on/off key is used for switching the power wheelchair
on, for activating the drive-away lock and for switching the
power wheelchair off.
Operation
6
4
3
1
8
5 Horn
6 O n/Off button
7 B attery capacity
(LED display)
8 C harging receptacle
underside
Ottobock
|
105