Function Overview; Robacta Drive Cmt Electronic Box Installation Set - Fronius Robacta Drive CMT Serviceanleitung

Function over-
Securing plate
view
The securing plate (7) is attached to the electronic box casing (6) and is used to prevent
(continued)
the connections on the RDIO 30 A PCB (4) from twisting.
CMT cable harness and FlexStrip cable, 4-pin
The CMT cable harness (11) connects the RDIO 30 A PCB (4) to the shaft encoder.
The data from the optional wire value sensor is sent via the 4-pin FlexStrip cable (9)
Power lead
The power lead (2) is the earth lead (GND) for the RDIO 30 A PCB. It is connected to pin
8 of the CMT (11) cable harness and to the media guide.
Robacta Drive The Robacta Drive CMT electronic box installation set incl. installation instructions is
CMT electronic available on request (item number on request).
box installation
set
20