Function Overview; Electronic Box; Position Of The Module In The Device; Overview - Fronius Robacta Drive CMT Serviceanleitung

Electronic box

Position of the
module in the
device

Position of the module in the device

Overview

(1)
Electronic box: Components
Function over-
JobMaster button and electronic box cover
view
The CMT drive unit is operated by the JobMaster button (1). The following functions can
be carried out:
-
-
-
The electronic box cover (8) surrounds and secures the JobMaster (1) button.
RDIO 30 A PCB and contact strips
The RDIO 30 A (4) PCB is the central control element for the CMT drive unit. The con-
nections for the motor, the LHSB and the robot cut-out box are attached to the RDIO 30
A PCB.
Electronics Box casing
The electronic box casing (6) protects the RDIO 30 A PCB (4) from dirt and thermal and
mechanical influences.
(3) (4) (5)
(2)
(8)
(9)
(10)
(11)
Wire feed
Wire retract
Gas test
(1) JobMaster button
(6) (7)
(2) Power lead
(3) Contact strips
(4) RDIO 30 A PCB
(5) Foam rubber seal
(6) Electronics Box casing
(7) Securing plate
(8) Electronics Box cover with fibre optic
cable
(9) FlexStrip cable, 4-pin
(10) Movable tube
(11) CMT cable harness with CFM
19