Residual Risks; Technical Data; Unpacking; Assembly - Scheppach Pwp32 Originalbetriebsanleitung

• For safety reasons, check fuel line, fuel tank, fuel cap
and connections regularly for damage, ageing (brittle-
ness), tight fit and leaks and replace if necessary.
5.3

Residual risks

The product has been built according to state-of-the-
art and the recognised technical safety rules.
However, individual residual risks can arise during
operation.
• Residual risks can be minimised if the "Safety Instruc-
tions" and the "Intended Use" together with the oper-
ating manual as a whole are observed.
• Use the product in the way that is recommended in
this operating manual. This is how to ensure that your
product provides optimum performance.
• Prevent the product being unintentionally started up.
• Keep your hands away from the working area when
the product is in operation.
• Comply with the stipulated maintenance and safety in-
structions in the operating manual.
• Furthermore, despite all precautions having been met,
some non-obvious residual risks may still remain.
6

Technical data

Motor 4-Stroke engine/
Displacement
Max.
Output power (kW)
Max. engine speed
Max. idle speed
Max. flow rate in l
Suction connection
Pressure connection
Max. delivery height
Max. suction height
Max. pressure
Fuel
Tank contents
Spark plug
2
CO output
Weight
Subject to technical changes!
Noise and vibration
WARNING
Noise can have serious effects on your health. If the
machine noise exceeds 85 dB, please wear suitable
hearing protection for you and persons in the vicinity.
The noise emission values have been determined in ac-
cordance with EN ISO 3744:1995.
PWP32 PWP60
4-Stroke
air cooled engine/
air cooled
212 cm³ 212 cm³
3.9 kW/5.3 HP 3.9 kW/5.3 HP
3800±50 rpm 3800±50 rpm
1600±150 rpm 1600±150 rpm
32000 l/h 60000 l/h
2"
2"
30 m
7 m
3 bar 2.8 bar
Petrol Petrol
3.2 l
F7RTC F7RTC
767 g/kWh 767 g/kWh
20 kg 21 kg
www.scheppach.com
Noise data
Sound pressure level L
Sound power level L
Guaranteed
sound power level L
Measurement uncertainty K
If necessary, adhere to rest periods and limit the duration
of work to the bare minimum.
7

Unpacking

WARNING
The product and the packaging material are not
children's toys!
Do not let children play with plastic bags, films or
small parts! There is a danger of choking or suffo-
cating!
• Open the packaging and carefully remove the product.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. Immediately report any damage to the trans-
port company that delivered the Product. Later claims
will not be recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
3"
well as type and year of manufacture for the product.
3"
28 m
8

Assembly

7 m
Tool required:
• Open-ended spanner/socket spanner, size 13 mm*
* = may not be included in the scope of delivery!
3.2 l
8.1 Fitting the rubber feet (1b) (Fig. 3)
1. Place a pad on the floor to avoid damage to the prod-
uct.
2. Insert the four M6 screws (1a) through the holes pro-
vided on the frame (1) and secure them with a rubber
foot (1b) each.
PWP32
91.2 dB
pA
103.9 dB
wA
106 dB
wA
2.19 dB
PWP60
95.5 dB
108.2 dB
110 dB
2.19 dB
GB | 23