Residual Risks; Technical Data; Unpacking - Scheppach Gp1300 Jet Originalbetriebsanleitung

• If the mains connection cable for the product is
damaged then it must be replaced by the manufac-
turer or their customer services personnel or by a
similarly qualified person, in order to avoid hazards.
• Do not use the cable to pull the plug out of the outlet.
• Protect the cable from heat, oil and sharp edges.
• Do not carry or fasten the product by the cable.
• Use only extension cables that are splash-proof
and intended for outdoor use. Always unroll a ca-
ble drum completely before use. Check the cable for
damage.
• Disconnect the mains plug from the socket before
carrying out any work on the product, as well as dur-
ing breaks in work and when not in use.
• Mains connection cables shall not have a smaller
cross-section than rubber hose lines with the desig-
nation H07 RN-F. The cable length must be 10 m.
The conductor core cross-section of the extension
cable must be at least 1.5 mm
Lubricants are used inside the pump which may con-
taminate the liquids flowing out if the product is operat-
ed improperly or damaged.
m WARNING! This power tool generates an electro-
magnetic field during operation. This field can impair
active or passive medical implants under certain circum-
stances. In order to prevent the risk of serious or deadly
injuries, we recommend that persons with medical im-
plants consult with their physician and the manufacturer
of the medical implant prior to operating the power tool.

6. Residual risks

The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Furthermore, despite all precautions having been met,
some non-obvious residual risks may still remain.
• Residual risks can be minimised if the "Safety In-
structions" and the "Intended Use" together with the
operating instructions as a whole are observed.
• Avoid accidental starting of the machine: the op-
erating button may not be pressed when inserting
the plug in an outlet. Use the tool attachment that
is recommended in this operating manual. This is
how to ensure that your machine provides optimum
performance.
20 | GB
.
2
www.scheppach.com
• Keep your hands away from the working area when
the machine is in operation.
7.

Technical data

Product L x W x H
Mains power
connection
Rated input
Delivery rate max.
Delivery height max.
Delivery pressure max.
Suction height max.
Pressure connection
and suction connection
Water temperature
max.
Protection class
Protection category
Operating mode*
Weight
Subject to technical changes!
Operating mode* S1: Continuous operation at constant
load
Noise
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB, please
wear suitable hearing protection.
The noise levels have been determined in accordance
with EN ISO 3744:1995.
Noise data
Sound power level L
WA
Sound pressure level L
pA
Uncertainty K
WA/pA

8. Unpacking

• Open the packaging and carefully remove the product.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. In the event of complaints the carrier must
440 x 200 x 300 mm
230 V~ / 50 Hz
1300 W
5400 l/h
50 m
5 bar
8 m
G1"
35°C
I
IPX4
S1
10.8 kg
85 dB
70.5 dB
2.17 dB