Scheppach HSM3500 Originalbetriebsanleitung Seite 27

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new device brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no lia-
bility for damage to the device or caused by the device
arising from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists,
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failures of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE0113 not being observed.
Our recommendation to you:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise your-
self with your device and to use it for its intended purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must be
read and carefully observed by all operating personnel
before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description
1. Saw blade guard
2. On/off switch
3. Handle on the cutting arm
4. Machine head
5. Motor
6. Roll slide with rubber coating
7. Stop rail with scale
8. Pan
9. Guide rail
10. Transport handle
11. Feet
12. Supporting frame
13. Rip fence
14. Diamond cutting wheel (Fig. 3.2)
15. Spray guard
16. Water shut-off valve
17. Spring
18. Water pump (Fig. 3.1)
3. Scope of delivery
• Stone and tile cutters
• Roll slide with rubber coating
• Diamond cutting wheel (Fig. 3.2)
• Rip fence
• Open-ended spanner and Allen key
4. Proper use
The machine may only be used in the intended manner.
The machine complies with the applicable EC ma-
chinery directive
• Before starting any work, all protective and safety
devices must be in place.
• The machine has been designed to be operated by
one person. The operator is responsible for third
parties in the area of operations.
• Observe all safety information and danger notices
on the machine.
• Ensure that all of the safety information and dan-
ger notices on the machine are complete and in
legible condition.
www.scheppach.com GB | 27